Filter
Top Products
Single sheets
Make sure that the printer is set to single sheet mode. If necess-
ary, change the paper type (see page 10, Paper path quick
selection).
Press the latch at the middle of the front cover. The single sheet
input tray opens downwards.
Align the left paper guide with the mark on the left of the single
sheet input tray. Adjust the right paper guide to the width of the
paper used.
Insert the single sheet into the input tray as far as possible.
Press the Online key to set the printer to ready status.
The sheet is automatically loaded when the printer is in online
mode and receives data from the computer. Press the Load (4)
key to load paper before starting the printout.
Install the paper support as required for the paper
width. For wide printers, you can use an additional
paper support in order to position wide single sheets
properly (see Accessories, page 20).
Quick Start-up Paper handling
13