Tamron P2000 Binding Machine User Manual


 
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
ProClick
Pronto
®
5
In order to hide the spine seam of a completed document,
you must place the rear cover face to face on top of the
front cover before you insert the document into the “Bind”
sections as indicated in the above illustration.
Insert punched document into the binding slot (punched
side first)
Press “BIND” to bind your document and remove the
document after you hear a BEEP.
Additional documents can be bound without resizing, if
binding books are of the same document size.
The ProClick
®
Pronto
will time out to the first step if it
stays idle for 2 minutes. You will need to resize your
document to continue.
Once the ProClick
®
Pronto
has measured the
document thickness, the display will indicate the correct
spine size to load into the machine. The example shown in
Display 2 indicates “Small” under “Insert correct
ProClick
®
spine size”.
The system will allow you to bind small documents with
larger spine sizes.
Insert the appropriate spine cassette into spine slot as
shown in Display 2.
4.5 Binding
Insert document into document sizer for the machine to
identify the document size as shown in Display 1.
The machine identifies the document in 3 different
sizes, “Small”, “Medium” and “Large”.
ENG
DISPLAY 1
DISPLAY 2
DISPLAY 3
DISPLAY 4
4.6 Editing your document
The ProClick
®
Pronto
has a special spine opener tool where you
can unbind the bound book for editing.
To unbind a bound book, just insert the wedge of the spine opener
tool into the loops of the ProClick
®
spine and pull forward in a sliding
action. This opens the ProClick
®
allowing you to edit the documents
and manually resecure the bind spine.