TANDBERG 770 MXP Computer Monitor User Manual


 
Appendices
275
Appendix 15: System Upgrade
System Upgrade
Before starting the software upgrade of the TANDBERG MXP system, please make sure to have
the new software file, (for instance s050000F30.pkg) and the Release Key for this software
available. Your TANDBERG Partner will provide this for you.
All options and settings will automatically be stored when upgrading, so no backup is necessary.
If the system upgrade process is aborted before it's complete, the system will work as normal with
the original software
The TANDBERG MXP systems can be upgraded in three different ways;
Using the web interface
Using FTP
Using ISDN
A) To upgrade using the web interface, please do the following steps:
1. Type the IP address of the TANDBERG MXP system that shall be upgraded (for instance
10.0.8.77) in a standard browser, such as Internet Explorer 6.0.
2. The web interface of the codec will then be displayed. Select the ‘System Configuration’ tab on
top of the page, and then the sub-tab ‘Upgrade’.
The following page will now be displayed: