Filter
Top Products
Installation
13
4. Power cable
Connect the power cable from the system’s power connector to an electrical distribution
socket.
5a. LAN cable
To use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the
system to the LAN.
5b. Wireless LAN - Insert PC Card
Remove the “dummy” card by pressing the ‘Eject’ button next to the slot.
Insert the Wireless LAN PC Card.
Note! Make sure the card is inserted in the right direction (with the product logo pointing
upwards). Push the card into the slot until the 'Eject' button pops up.
Please see Wireless LAN Settings
for configuration.