TANDBERG D13751.01 Power Supply User Manual


 
If the menu is not already present, press the
OK/Menu key on the remote control to open
the menu. Navigate the menu with arrow keys
and OK. Go one step back with the Cancel
key. Close all menus by pressing Cancel for 1
second.
2. Language
Open ‘General’. Select language and press ‘Save’.
3. ISDN Conguration
Open ‘Network - ISDN-BRI Settings’. Make ISDN
conguration and press ‘Save’.
1. Open the Administrator Settings menu
Choose ‘Control Panel’ from the main menu. In
‘Control Panel’, select ‘Administrator Settings’ and
press OK.
4. LAN Conguration
Open ‘Network -LAN Settings’. Make IP/H.323
settings and press ‘Save’.
The Remote Control
Please read the user manual
for further details.
System Conguration
1. Mic off: Mute and unmute the microphone.
2. Arrow keys: Navigate in menus or move camera.
3. Volume: Adjust the volume up and down.
4. Layout: Change picture layout on the screen.
5. Cancel: Go one step back or close menu.
6. Call: Press Call to start calling.
7. Presets: Activate presets in a call.
8. Snapshot: Send a snapshot in a call.
9. Presentation: Show PC (default).
10. OK/Menu: Navigate in menus.
11. Zoom: Zoom camera in and out.
12. Selfview: Show outgoing video picture (yourself).
13. Phone Book: Open Phone Book.
14. End Call/Standby: End call or go to standby.
15. Number keys: Dial a number.
16 Touch Tones: Press Touch Tones in a call to dial
extension numbers e.t.c.
D13751.01 Page 2