Filter
Top Products
6
Targus USB to Parallel Printer Cable
1 Plug the printer cable into the parallel port on the
adapter.
2 Install the printer software driver according tot he
instructions that come with the device.
3 If prompted to select a port, choose USB001 (USB
port). If this port does not appear in the list, choose
the LPT1 port, complete the manufacturer’s setup for
your printer, and refer to the instructions below to
redirect your printer.
Checking and Redirecting the Printer
Port Settings
Follow these instructions to check the printer port
settings and redirect your printer from the LPT 1 port to
the USB001 (USB port) on the adapter.
1 With the printer connected to the adapter’s parallel
port, select Start, Settings, and then Printers.
2 Right-click the printer device you are reassigning and
select Properties.
3 In the Printer Properties window, select Details or
Connection for the Printer. (Section titles vary, so
check your printer’s user manual for specific
instructions.)
4 Change the setting to USB001 (USB port) to redirect
printing to the adapter.