Filter
Top Products
3 Release the reset button when the red LED flashes one time.
The mouse is now in power off mode and cannot be used. To power
on the mouse, press and release the reset button so that the red LED
glows. You can now use the mouse again.
Mouse Model PAUM006
Establishing a Communications Link
1 Press and release the link button on the receiver.
Link Button/
Status Light
Receiver Link Button (PAUM006)
2 Press and release the link button, located on the bottom of the
RF mouse.
Link
Button
Mouse Link Button (PAUM006)
The receivers status light flashes red once the mouse and
receiver are activated and whenever there is mouse
activity.
030704 PAUM006Add2r_eng.fm Page 3 Friday, July 4, 2003 3:40 PM