Filter
Top Products
8
7 Replace the mouse ball and the retainer. Turn the retainer
clockwise until it is secure.
8 Plug the USB connector back into the computer’s USB
port or, if you are using the PS/2 adapter, turn on the
computer.
Cleaning the Optical Sensor (Mouse Models PAUM003 v2,
NW03BM and NW04MM)
1 Unplug the USB connector from the computer or, if you
are using the PS/2 adapter, turn off the computer.
2 Using a cotton swab and mild soap and water, gently wipe
the optical sensor until it is clean. Never scratch the
surface of the sensor.
3 Plug the USB connector back into the computer’s USB
port or, if you are using the PS/2 adapter, turn on the
computer.
Things to Remember
Safety Measures
Mouse Models PAUM003 v2, NW03BM and NW04MM
If you are using an optical mouse, never point the optical
sensor toward the face, particularly the eyes, to avoid possible
injury.
Operating Hints
Mouse Models PAUM003 v2, NW03BM and NW04MM
If you are using an optical mouse, for optimal performance:
• Never use the mouse on a glass or mirrored surface or on
black velvet as these surfaces will cause the mouse to fail
temporarily.