6
Targus Ultra-Mini Wireless Optical Mouse Presenter
Installing the Batteries
1 Remove the battery cover from the top of the mouse
presenter by pressing the battery cover hinge located on
the bottom of the mouse presenter and sliding it off.
2 Insert the supplied batteries, making sure that the
positive (+) and negative (-) ends of each battery match
the polarity indicators inside the battery housing.
WARNINGS: When replacing the batteries, you must
use rechargeable batteries only.
Avoid mixing new and used batteries in a device.
3 Slide the battery cover back into position until it “clicks”
firmly into place.
4 For best results, you should charge the mouse presenter
on the charger base/receiver at least 12 hours before
using it.
NOTE: To continuously charge the mouse presenter
your computer must be on and awake. For best
results, turn off your computer's power management
feature while charging the mouse.