Filter
Top Products
3
NOTES: The USB 2.0 Mobile Mini Hub is backward
compatible, so you can connect it to a computer with either a
version 1.1 or 2.0 USB interface.
When using the mini hub with a computer that has a version
1.1 USB interface, all of the devices attached to the mini hub
will run at a version 1.1 USB speed.
Connecting the Mini Hub to Your
Computer and Installing the
Default Device Drivers
To connect the mini hub to your computer and install the
operating system’s default drivers:
1 Plug the supplied high-speed cable’s USB connector end
(type A) into a USB port on your computer.
2 Plug the cable’s other connector end (type B) into the mini
hub.
Mini hub - AC power jack and USB port (type B)
3 Connect the supplied AC power adapter to the AC power
jack on the mini hub, then plug the adapter into an
available electrical outlet.
Your computer’s operating system automatically detects
the new hardware and begins installing the appropriate
default drivers.
4 Follow the on-screen instructions to complete the driver
installation.
You can now connect USB devices to the mini hub or daisy-
chain additional hubs.
AC power
jack
USB port
(type B)