Filter
Top Products
5
Targus Wireless Keypad & Mini Optical Mouse
Connecting the Receiver
To connect the receiver:
1 Plug the USB receiver into an available USB port on
your computer.
2 Follow any on-screen instructions to complete the
default driver installation.
The “Lock LED” light turns on.
You are now ready to set the identification code to establish
a communication link with the receiver.
Setting the Identification Code
After your computer detects the USB receiver and the
driver software is installed, you must set the ID code
between the receiver and the mouse as well as between the
receiver and the keypad BEFORE you can use them. To do
this, do the following:
NOTE: Make sure that your computer is turned on and
has detected the USB receiver before you set the ID
code.