TDK Half Brick-iHG Network Card User Manual


 
Data Sheet: Xeta
iHG48070A033V, 3.3V/70A Output Half Brick Series
©2008 TDK Innoveta Inc.
iHG Datasheet 2008-05-15 Revision 1.1
(877) 498
-
0099
2/16
Platform Overview:
Xeta
iHG48 Series DC-DC Power Modules
48V Input, 3.3V / 70A Output
Half-Brick
The Xeta
iHG48 Series power modules operate
over a wide 36 – 75Vdc input voltage range and
provide one regulated dc output voltage that is
electrically isolated from the input. The single
board open-frame type design with high
conversion efficiency (up to 92%), and superior
thermal performance make iHG series modules
ideally suited for high power, low air flow telecom
applications in demanding thermal environments.
A wide output voltage trim range, -50 to 10%, and
remote sensing are standard features enhancing
versatility.
Standard Features:
RoHS compliant
Standard Half Brick footprint
Optimized output power: 231W
Full load efficiency, 90% typical
Wide output trim voltage range
Up to 70A of true usable current
Single board design
52A at 65°C, 200LFM (no base-plate)
Monotonic start-up into a pre-biased
output bus
Remote sense
Basic insulation – 1500 Vdc
Constant switching frequency
Auto-recovery protection:
o Input UV protection
o Output over voltage
o Output over current
o Short circuit
o Thermal protection
High reliability open frame, surface-
mount construction
Open frame for improved thermal
management
UL 60950 (US and Canada), VDE 0805,
CB scheme (IEC950), CE Mark
(EN60950)
Multiple patents
Optional Features:
Latched output over voltage protection
Latched output over current protection
Latched over temperature protection
Base-plate