Technika LPA111 Network Card User Manual


 
Read these instructions. Keep these instructions. placed on the product.
Heed all warnings. Follow all instructions.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user's
Do not use this apparatus near water.
authority to operate this device.
Clean only with a dry cloth.
IMPORTANT
Install in accordance with the manufacturer's
This equipment generates, uses and can radiate
instructions.
radio frequency energy and, if not installed and
Do not install or operate near any heat sources such as
used in accordance with the instructions, may cause
radiators, stoves, or other apparatus that produce heat.
harmful interference to radio communication.
Do not use near heat sensitive objects
However, this is no guarantee that interference will
Unplug this apparatus during lightning storms or
not occur in a particular installation. If this
when unused for long periods of time.
equipment does cause harmful interference to radio
Refer all servicing to qualified service personnel.
or television reception, which can be determined by
Servicing is required when the apparatus has been
turning the equipment off and on, the user is
damaged in any way, such as the power-supply
encouraged to try to correct the interference by one
cord or plug is damaged, liquid has been spilled or
of the following measures:
objects have fallen into the apparatus, the
- Reorient or relocate the receiving antenna.
apparatus has been exposed to rain or moisture,
- Increase the separation between the equipment
does not operate normally, or has been dropped.
and receiver.
Warning: To reduce the risk of fire or electrical
- Connect the equipment into an outlet on a circuit
shock, do not expose this product to rain, sunlight
different from that to which the receiver is
or moisture. The product must not be exposed to
connected.
dripping and splashing and no object filled with
- Consult the dealer or an experienced radio/TV
liquids should be placed on the product.
technician for help.
No naked flame sources such as candles should be
Introduction
! The MPA111 is a 19VDC power adaptor with a universal mains input of 100-240VAC
so you can operate it worldwide with a suitable mains power cord or adaptor.
Included with the adaptor are several DC plug tips which will operate most
currently available laptops.
! The unit features a power output of 4.74A. This output power will enable you to
operate your laptop and charge the laptop during normal use.
! In periods of heavy use, especially if the laptop is powering several USB peripherals,
the adaptor may not be able to power the laptop and charge the battery.
! It is safe to leave the unit connected to the mains supply for extended periods, so
battery charging can take place in the laptop’s “down time”.
! It is normal for power adaptors to become warm during use. Avoid touching the
device during use.
! As a precaution, unplug the unit from the mains supply when not in use.
! The means of disconnection from the mains is the mains plug on the power cord.
This must be unobstructed and freely accessible at all times.
Unpacking
! Unpack the unit. In addition to this manual the packing contains:
! The power adaptor, with a mains power cord suitable for your area.
! A set of DC plug tips with a chart which will enable you to match a specific tip to
your laptop model.
If any item is damaged or missing return the unit to your local Tesco store. Please have
your receipt with you when you call. Dispose of the packing in full compliance with
recycling regulations in your area.
Before you begin:
The adaptor has an output voltage of 19VDC+/- 5%.
Before you use this product you must verify that your laptop will operate at a
nominal19V DC. Your laptop manual or the rating plate under the laptop will tell you
the operating voltage.
Operation
! Switch the laptop off.
! Using the supplied chart, determine which tip is suitable for your laptop.
! Plug the tip into the laptop’s DC power supply input to verify that it fits properly.
! Unplug the tip. You can now connect the tip to the DC supply cable on the adaptor.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that there are important
operating and maintenance instructions in
the literature accompanying this unit.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
Important Safety Instructions: Please follow all the precautions listed below for safety and to
reduce the risk of fire, injury or electrical shock.