Filter
Top Products
User Guide 45
Solution:
1. Choice of media; check the following:
■ Use Tektronix media.
■ Use the correct media tray for the media you are using.
■ When using the Multi-Purpose Tray, select the correct media
in the front panel.
2. Relative humidity may be too low (below 30 percent relative
humidity).
■ Refer to Calibrate for Paper in the printer’s front panel and run
this mode:
■ Press Help, scroll to Print Quality, press Menu, scroll to
Calibrate for Paper, press Menu, print the references pages.
Follow the instructions on these pages and adjust the transfer
setting.
3. Replace imaging unit or transfer kit.