Filter
Top Products
92
PhaserShare Networking Manual
8
TCP/IP Host Configuration (UNIX)
5.
Fill in the fields; refer to the following table.
6.
To process the information, press Enter. Make sure that SMIT finishes with
an OK in the upper left hand corner. To return to the first Printer/Plotter
Devices menu, press F3.
Hewlett-Packard HP-UX 9.x and 10.x
1.
Log in as root on your workstation.
2.
Make a backup copy of the /etc/hosts file.
3.
Edit /etc/hosts and add a line that defines the printer's IP address and its
remote machine name.
4.
Use the HP System Administrator Manager program (SAM) to configure
an HP workstation. From the command line, type: sam.
Field name Description
Attachment Type Select remote.
Type of Remote Printing Select Local filtering before sending to
print server.
Remote Printer Type Select Other, then generic.
Name of NEW print queues to add Use the down-arrow key to move down to
PostScript, then enter the print queue name
on the right side. This can be anything.
HOSTNAME of remote server The name that you entered in your
/etc/hosts
file as the remote machine name.
Name of QUEUE on remote server Queue name that the printer recognizes:
■ PS for PostScript
■ PCL for text
■ HPGL for HP7475A
■ AUTO for automatic selection.
TYPE of print spooler on remote
server
Press F4 and select BSD.
Send PASS-THROUGH FLAG to
queue on remote server?
Select F4 and select no.
N
O
T
E
You need superuser privileges to edit this file.
The IP address you enter here for the printer must be the same address you
specified as the Tektronix printer IP address when you configured the
printer. For example:
134.62.33.138 tekphaser
In this example, 134.62.33.138 is the printer's IP address and
tekphaser is the printer's remote system name.