Filter
Top Products
PRGS430.DLL—Description
2-21
Operation
/FN0022/ SetNotificationWnd
LONG SetNotificationWnd(LONG hWnd, LONG IMessageID)
SetNotificationWnd() enables the status notification of a window. hWnd
passes a window handle and IMessageID passes a message identifier. Each
time a notification of the status window is necessary, the DLL sends a
IMessageID message to the hWnd window. The execution status of an
operation is passed in the WParam of this message. Completion status of the
current operation is passed (0..100) in the LParam.
The following status codes are defined:
Status WParam Current Operation
STATUS_CONNECTSPA 1 Connecting to SPA430
STATUS_CONNECTTARGET 3 Connecting to target
STATUS_RELEASETARGET 5 Releasing target
STATUS_RELEASESPA 7 Releasing SPA430
STATUS_RESETTARGET 9 Resetting target
STATUS_ERASE 11 Erasing target
STATUS_ERASECHECK 13 Erase checking target
STATUS_PATTERNCHECK 15 Pattern checking target
STATUS_VERIFY 17 Verifying target
STATUS_PROGRAM 19 Programming target
STATUS_READOUT 21 Reading target out
STATUS_BLOWFUSE 23 Blowing fuse
/FN0023/ GetDeviceCfgInfo
long int GetDeviceCfgInfo(long int InfoCmd, long int InfoIdx, void* lpBuf)
InfoType:
DEVICE_COUNT (0x01)
GetDeviceCfgInfo returns number of devices in Device.cfg; InfoIdx and lpBuf
are ignored.
SELECT_DEVICE (0x02)
Selects the given device for further commands (device number in InfoIndex,
first device is number 0; lpBuf is ignored).
DEVICE_NAME (0x03)
Fills the name of the selected device into lpBuf; InfoIdx is ignored.
DEVICE_ID (0x04)
Fills the DeviceID into lpBuf, InfoIdx is ignored.
DEVICE_DEFAULTOPTIONS (0x05)
Fills the default options into lpBuf, InfoIdx is ignored.
DEVICE_MEMDEF_COUNT (0x06)
GetDeviceCfgInfo() returns the number of memory definitions for selected
device; lpBuf and InfoIdx are ignored.