Filter
Top Products
1
Getting Started
Installing the Paper Roll
1. Lift the paper holder so that it extends behind the calculator.
2. Make sure the calculator is plugged into an easily accessible
electrical outlet near the calculator.
3. Move the
POWER
switch to
ON
.
4. Insert the end of the paper into the paper slot on the back of the
calculator as shown. To avoid paper jams, use quality bond paper.
5. While feeding the paper into the slot, press and hold
&
.
6. Place the paper roll on the paper holder.
Note
To prevent damaging the printer (which may void the warranty),
move the
POWER
switch to
ON
when operating the calculator without
paper.
Replacing the Ink Roller (IR-87T)
1. Tear off the paper between the paper roll and the calculator, and
then press
&
to run out the remaining piece of paper.
2. Move the
POWER
switch to
OFF
.
3. Remove the clear plastic printer compartment cover.
4. Grasp the tab on top of the red roller and gently lift the roller out of
the compartment.