Filter
Top Products
8
Listening to the Radio
1. Press the
¿
Radio On/Sleep Button once to turn the radio on. The Radio Power Indicator will appear
at the top of the display.
Note: If the
¿
Radio On/Sleep Button is pressed more than once, the unit will enter the sleep sounds mode.
See the Sleeping to the Radio with Timer section for more information about this feature.
2. Slide the ƺ Radio Band Switch to AM or FM.
3. Rotate the Ƹ Radio Tuning Thumbwheel to select a radio station.
4. Rotate the ƹ Volume Thumbwheel to adjust the volume level.
5. Press the
ᕢ
Off/Reset Button to turn the radio off.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Sleeping to the Radio with Timer
1. Follow the above instructions to select a radio station.
2. Press the
¿
Radio On/Sleep Button twice to enter the sleep mode.
3. Continue pressing the
¿
Radio On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time.
The Sleep Timer appears in the bottom-left corner of the display.
4. The Sleep Volume Indicator will appear, showing that the timer has been activated. Press the » Sleep
Volume Button to adjust the sleep volume to a comfortable level. This will not affect the alarm volume.
Turning the ƹ Volume Thumbwheel also adjusts the sleep volume, though this affects the alarm volume.
5. The radio will play for the programmed sleep time and then shut off. To turn off the radio before the sleep
time has elapsed, press the
³
Off/Reset Button.
Listening and Sleeping to the Radio