Filter
Top Products
MICROSOFT® WINDOWS 2000
TCP/IP settings are automatically set up during the software installation process. The following
procedure may be used to change TCP/IP settings, if necessary.
1. Right click the ‘My Network Places’ icon and select ‘Properties’.
2. From the “Network and Dial-Up Connections” window, right click on the ”Topcom Dial-Up
PPP Connection“ icon and click ‘Propertie’s.
3. From the “Networking” tab of the “Topcom Dial-Up PPP Connection Properties” window,
select ‘Internet Protocol (TCP/IP)’ and click ‘Properties’.
4. The “Internet Protocol (TCP/IP) Properties” window is used to modify the IP address and
DNS Server addresses:
• Change the IP address to a user defined address by selecting ‘Use the following IP
address’ (click inside the circle to the left of it) and typing the address in the space provided.
• Change the DNS Server addresses to user defined addresses by selecting ‘Use the
following DNS server addresses’ (click inside the circle to the left of it) and typing the
addresses in the spaces provided.
Note: The “Advanced” button of the “Internet Protocol (TCP/IP) Properties” window may be used to
Xplorer 850
191919191919