Filter
Top Products
3
ENGLISH
1 The rear panel
• POWER (5V DC):
The power port is to connect the DC power adapter.
•WAN :
The WAN Ethernet port is to connect your ASDL/Cable modem.
• Serial:
The Serial port is to connect a 56K serial modem (optional).
• Ports 1- 4:
This is to connect networked devices, such as PCs, ftp servers or any-
thing else you want to put on your network.
• Uplink/Normal:
In the Uplink Mode, port 1 is where you can expand your network
by connecting to another switch or hub. In Normal Mode, port 1 does not have an up-
link function.
• Reset Button:
If you would like to load default settings, press the reset button and
hold it for 5 - 6 seconds. It will load the factory default settings for the device. Do not
press the reset button unless you want to clear the current data.
2Configuring the PC to connect to the Cable/DSL router
Remark
- The routers default IP address is:
192.168.2.1
- DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your
PC to accept the IP address that the router will provide.
1Click
Start
button, select
Settings
, then
Control Panel
2 Double-click the
Network
Icon
3In the
configuration
windows, select the
TCP/IP protocol line
that has been
associated with your network card/adapter.
BR104.book Page 3 Friday, June 21, 2002 10:54 AM