Filter
Top Products
Topcom Wireless Broadband Router WBR 611 9
ENGLISH
• Now you can change the LAN settings:
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
- Click
Next
to proceed
• Now the WBR611 will try to detect your broadband connection type
• Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click
Next
to proceed
-
Obtain IP automatilally (DHCP client)
: this connection is mostly used for connecting the WBR611 to a cable
modem.
-
Fixed IP address
: for connections with fixed WAN IP address.
- enter the
WAN IP
,
Subnet Mask
,
Gateway
and
DNS
addresses.
- Click
Next
to proceed.
WBR611.book Page 9 Wednesday, April 14, 2004 3:54 PM