Filter
Top Products
Edit a QoS rule Select the rule you want to edit and click “Edit”,
then you will enter the detail form of the QoS
rule. Click “Apply” after editing the form and the
rule will be saved.
Adjust QoS rule priority You can select the rule and click “Move Up” to
make its priority higher. You also can select the
rule and click “Move Down” to make its priority
lower.
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range, traffic type,
protocol, local port range and remote port range parameters. The parameters that you leave as
blank will be ignored. The priority of this rule will be applied to packets that match classification
criteria of this rule. You can limit bandwidth consumed by packets that match this rule or
guarantee bandwidth required by packets that match this rule.
Parameters Description
Rule Name
The name of this rule.
Bandwidth
You can assign the download or upload
bandwidth by the unit of Kbps (1024 bit per
second). You can limit the maximum bandwidth
consumed by this rule by selecting “Maximum”.
You also can reserve enough bandwidth for this
rule by selecting “Guarantee”.
58