Filter
Top Products
Black Gold Single Phase Uninterruptible Power Supply Systems
Guide Specifications
2.0kVA Industrial Rackmount
Page 4 of 5
There is also a switch on the front panel (Run/Stop) that allows you to manually switch
from UPS to bypass mode. (Run - UPS mode, Stop - Bypass mode).
7.0 System Status and Control Indicators
7.1 Panel
The UPS has a panel on the front for complete monitoring of UPS.
Operation Panel:
1) Run/Stop
2) Fault indicator
3) AC Line indicator
4) Inverter indicator
5) 8 Segment LED Display
The eight segment LED display will indicate the following:
1) Output Load (normal operation)
2) Battery Voltage Level (during input AC failure)
3) Self-diagnostics (UPS faults)
Fatal Faults:
1) Input overcurrent
2) DC overcurrent
3) DC overvoltage
4) UPS system error
Non-Fatal Faults:
1) Output overvoltage
2) Output low voltage
3) DC undervoltage
4) Overheat
5) Battery problem
8.0 Dimensions
2.0 KVA
Weight 119 lbs
Depth 24”
Width 16.75”
Height 5.25”
9.0 Communications
UPS comes with 4 dry contact signals relayed through a DB9 male connector.