Filter
Top Products
7/02, SatelliteToshiba TRR Page 18
Satellite 2400 Series Disassembly Overview, cont.
To remove the RTC battery, follow the steps below.
1. Disconnect the RTC battery cable from
PJ9999 on the sound board.
2. Lift out the RTC battery.
To install the HDD connector board, follow the steps
below.
1. Seat the HDD connector board and
carefully connect it to PJ2000 on the
system board.
2. Secure the HDD connector board with
two M2x5 silver thin flat-head screws.
3. Lift out the HDD connector board.
CAUTION: Be careful not to damage or pinch the
FDD SUMI card when you seat the HDD connec-
tor board. Be sure the wireless LAN switch is in
the correct position.
To remove the sound board, follow the steps below.
1. Disconnect the sound SUMI card from
PJ7100 and PJ7101 on the sound board.
2. Disconnect the CD switch board SUMI
card from PJ7102 on the sound board.
3. Remove one M2.5x4 screw securing the
sound board.
4. Lift up the sound board.
To remove the CD switch board, follow the steps
below.
1. Remove four M2.5x4 black flat-head
screws securing the front cover
assembly.
2. Remove the front cover assembly.
3. Remove the CD SUMI card from PJ7300
on the CD switch board.
4. Remove two M2.5x4 black flat-head
screws securing the CD switch board.
5. Remove the CD switch board from the
front cover assembly.
!