Filter
Top Products
4200FA CT
March 4, 2010
8
AC OUTPUT VOLTAGE (Line to Line, Line to Neutral)
AC OUTPUT CURRENT
BATTERY VOLTAGE
BATTERY CHARGING CURRENT
INPUT FREQUENCY
OUTPUT FREQUENCY
INPUT/ OUTPUT kW
POWER FACTOR
4) SYSTEM DIAGNOSTICS - The following diagnostic information shall
be provided to troubleshoot the UPS should a fault occur:
UPS Ok
UPS Overload (including Bypass)
Memory Error
Inverter Output Current Limit
Wrong Phase Rotation of AC Input
Low Battery Voltage
Internal AC Circuit Fault
I/O not Synchronized
Internal DC Circuit Fault
Auto-transfer Mode
Heatsink Overheat
Fuse Open
DC unbalanced
Battery Discharging Mode
DC Circuit Over/Under voltage
UPS Output Disabled
DC Circuit Overcurrent
Chopper Input Overcurrent
Inverter Overcurrent
Inverter Over/Under voltage
Inverter Overload
5.0 MECHANICAL DESIGN
A. UPS Enclosure
The UPS shall be in a freestanding, NEMA1 enclosure equipped with
casters and leveling feet. The overall dimensions and weights shall be as
follows (without internal batteries):
UPS Size Dimensions Weight
25 kVA 20.0”W x 36.3”D x 59.7”H 910 lbs.
B. Cable Entry
The UPS shall be provided with cable entry from the bottom, top and rear
of the UPS enclosure.