Filter
Top Products
113
Learning the Basics
Using the optical disc drive
Use only standard (12 cm) CD, DVD, or BD Discs. Any other size or
shape disc cannot
be removed from this slot and may damage the
system.
Removing a disc (slot-type drive)
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
The computer must be powered on to eject a disc.
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then place the
disc in its protective cover.
Inserting an optical disc (tray-type drive)
(Available on certain models)
To insert an optical disc into the drive:
1 Make sure the computer is turned on.
The drive will not open if the computer’s power is off.
2 Make sure the drive’s in-use indicator light is off.
3 Press the drive’s eject button.
The disc tray slides partially out of the drive.
4 Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
NOTE