Filter
Top Products
8-4
EO1-33017
8. LOADING THE MEDIA
8. The media is now loaded and the sensor position is set.
Batch type:
Media
Fig. 8-6
Cutter type: Where a cutter is fitted load the media as standard and feed it through the cutter
module.
NOTES: 1. Be sure to cut the backing paper of label. Cutting label will cause the glue to stick to the
cutter, which may affect the cutter quality and shorten the cutter life.
2.
3. Use of tag paper with the thickness exceeding the specified valve may affect the cutter life.
Fig. 8-7
Media
Media Outlet
Cutter Module
8. LOADING THE MEDIA
If the top edge of label winds onto the platen in cut issue, have the printer's PARAMETER
setting adjusted for auto feed after cut. Please contact your authorized TOSHIBA TEC
representative to change the Operation Panel setting.