Toshiba B-SX5T Printer User Manual


 
3. OPTIONAL KIT EO10-33013B
(Revision Date: May 22,2009)
3.10 RFID MODULE: B-SX704-RFID-U2-EU/AU/US-R
3- 6
To use this device, printer firmware V4.7 or greater is required. Upgrade the firmware to V4.5 or
greater, if necessary. For the downloading procedure, refer to Section 7 PROGRAM DOWN LOAD.
Note that a RAM clear needs to be performed after downloading, so print out the maintenance
counter and parameter settings prior to downloading. After performing a RAM clear, restore the
printer parameter settings to the former states.
Destination Code Setting should be performed in the system mode of the printer according to the
destination.
The countries where the use of this device is allowed are as follows:
Model Name Setting Frequency Band Applicable Countries
US UHF 902.75 to 927.5MHz U.S.A., Canada
AU UHF 918.25 to 925.75 MHz Australia
KR UHF 910.4 to 913.6 MHz South Korea
B-SX704-RFID–U2-US-R
(Serial Number:
2809Axxxxxx or later)
TW UHF 922.25 to 927.25 MHz Taiwan
Specification:
The specification of the B-SX704-RFID-U2-EU/AU/US/CN-R is as follows.
Item Specification
Module
EU: TOSHIBA TEC TRW-EUM-01 for Europe
AU: TOSHIBA TEC TRW-AUM-01 for Australia
US (Serial Number 2808Yxxxxxx and earlier):
TOSHIBA TEC TRW-USM-01 for U.S.A. and Canada
US (Serial Number 2809Axxxxxx or earlier):
TOSHIBA TEC TRW-USM-01 for U.S.A., Canada, Australia, South
Korea, Taiwan
CN: TOSHIBA TEC TRW-CNM-01 for CHina
Applicable standard
EU: ETSI EN 300 220
AU: C-Tick AS.NZS 428(2003); A1
US: FCC Part15 Subpart C
TW: NCC (National Communications Commission)
LP2002 Low-power Radio-frequency Devices Technical Specifications
KR: KCC (Korea Communications Commission)
Radio Certification Standard No. 2008-26 Article 98
Frequency range
EU: 869.7 - 870.0MHz
AU: 918.25 – 925.75MHz
US: 902.75 – 927.5MHz
KR: 910.4 – 913.6 MHz
TW: 922.25 – 927.25 MHz
CN: 920.625 – 924.375MHz
Center frequency
EU: 869.85MHz
AU: 922MHz
US: 915.125MHz
KR: 912MHz
TW: 924.75MHz
CN: 922.5MHz
Output power (ERP) EU: Max. 5mW (Power class 7a)
Output power (Conducted) 10 - 100mW
Modulation method (RWTag) DSB-ASK
Modulation method (TagRW) Back scatter ASK
Transmission speed (RWTag) 40kbps
Transmission speed (TagRW) 40kbps
Encoding (RWTag) PIE
Encoding (TagRW) FM0
Number of channels
EU: 1
AU: 31 (Frequency Hopping)
US: 99 (Frequency Hopping)
TW: 21 (Frequency Hopping)
KR: 17 (Frequency Hopping)
CN: 16 (Frequency Hopping)
Duty Cycle EU: Max. 100% (Class 4)
Carrier sense feature None
Environmental standard RoHS directive
Available RFID tags EPC C1 Gen2, ISO-18000-6C