Filter
Top Products
2-3
2. SPECIFICATIONS
EM1-33033
I I
H
H
G
G
D
C
C
1
1
2
2
A
A
F
B
E
Stop
position
Cut
position
Label
Reference
coordinate
Reference
coordinate
Stop
position
Cut
position
Feed direction
Tag paper
Black Mark
(on reverse side)
Tag paper
Reference
coordinate
Reference
coordinate
J
Refer to the following
NOTE 2. Black Mark
(on reverse side)
2.3 Media
2.3 Media
NOTES: 1. The media specification other than above are unchanged.
2. When marking black marks on label rolls, the following requirements must be satisfied.
When the gap length is less than 4 mm:
The black mark length should be longer than the gap length.
When the gap length is 4 mm or more:
The black mark should not overlap the gap for more than 4 mm and the following label.
2.4 Ribbon
NOTES: 1. "On the fly issue" means that the printer can draw and print
without stopping between labels.
2. To ensure print quality and print head life use only TOSHIBA
TEC specified media and ribbons.
3. When using the cutter ensure that label length B plus inter
label gap length E exceeds 35 mm. (i.e. label pitch should
be greater that 35 mm.)
4. When rewinding the media onto the take-up spool in batch
mode, the max. outer roll diameter should be 180 mm.
5. Use of rough media for the ribbon saving issue may cause
ribbon smudges.
Fig. 2-1
25.4 ~ 999.0
23.4 ~ 997.0
50.8 ~ 112.0
47.8 ~ 109.0
2.0 ~ 20.0
2.0 ~ 10.0
10.0 ~ 104.0
21.4 ~ 384.0
21.4 ~ 896.0
23.4 ~ 384.0
23.4 ~ 896.0
1.0
Refer to the following NOTE 2.
192.0
448.0
ø200 Max.
0.13 ~ 0.17
0.15 ~ 0.29
A : Span of one label/tag
B : Label/tag length
C : Width including backing paper
D : Label width
E : Gap length
F : Black mark length (Tag paper)
G : Effective print width
H :
I : Print speed up/slow down area
J : Black mark length (Label)
Maximum effective
length for on the fly issue
Outer roll diameter
Thickness
10.0 ~ 999.0
8.0 ~ 997.0
2.0 ~ 20.0
6.0 ~ 384.0
6.0 ~ 896.0
8.0 ~ 384.0
8.0 ~ 896.0
Label: 38 ~ 999.0
Tag: 25.4 ~ 999.0
25.0 ~ 993.0
6.0 ~ 20.0
23.0 ~ 384.0
23.0 ~ 896.0
23.4 ~ 384.0
23.4 ~ 896.0
Item
Label dispensing mode
Batch mode Strip mode Cut mode
Effectice
print length
Label
Tag
Standard
Max. memory
Standard
Max. memory
Standard
Max. memory
Label
Tag
[Unit : mm]
Type
Width
Length
Outer diameter
Spool type
68 mm ~ 112 mm
600 m
ø90 mm (max.)