Filter
Top Products
4 ADVANCED FUNCTIONS
70 Mailbox Transmission
Creating/modifying a relay station mailbox
You can create or modify the relay station mailbox.
1
Press the [FAX] button on the control panel.
P.20 “Basic procedures”
2
Press the [ADVANCED] tab, and then press [ITU MAILBOX].
This screen is the same as the one you see when you create the confidential/bulletin board mailbox.
P.68 “Creating the confidential or bulletin board mailbox”
3
In the “BOX TYPE” group, press [RELAY]. In the “MODE” group, press [BOX SETUP] or
[MODIFY], and then [OK].
If the selected mailbox is not set at the time of modification, an error message is displayed and you are unable to
proceed.
4
Press [BOX NUMBER] to display the entry screen. Key in the box number(s) (a
maximum of 20 digits), and then press [OK].
y If you want to set a password (a maximum of 20 digits), key in the password in the same way as the box
number.
y If the box number or password is incorrect, an error message is displayed and you are unable to proceed.