Filter
Top Products
4
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved KD-1025
DISASSEMBLY AND REPLACEMENT
4 - 17
[E] Drawer feed clutch (CLT2/CLT3)
(4) Remove pulley, one-way clutch, and 3 E-
rings to take off the pickup roller.
Fig. 4-45
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Remove 2 screws, and take off the clutch
bracket and the bushing.
Fig. 4-46
(3) Remove 1 connector and take off the clutch.
Note:
Match the protruding portion of the clutch
with the position shown in the figure for
assembling.
Fig. 4-47
Pickup roller
One-way clutch
E-rings
Pulley
Clutch bracket
Bushing
Connector
Protrusion
Clutch