Filter
Top Products
User’s Manual 4-25
Operating Basics
■ Region codes for BD drives and media
BD drives and their associated media are manufactured according to
the specifications of three marketing regions. Region codes can be set
from WinDVD BD ([Region] tab in [Setup] dialogue). When you
purchase BD Video, make sure it matches your drive, otherwise it will
not play properly.
■ To playback video on an external display or TV using WinDVD BD, use
output devices like external displays or TV that have RGB or HDCP
supported HDMI port.
■ The Blu-ray disc movie can be played only on internal LCD displays or
external devices connected via an RGB and HDMI output. In the Clone
mode (DualView), WinDVD plays on a display which is set as the
Primary display and shows black screen on the other display.
■ This product does not play HD DVD discs. Blu-ray discs with high-
definition content are required for HD viewing.
■ Do not switch to Sleep or Hibernation Mode while WinDVD BD is
running. Make sure to close WinDVD BD before going into either Sleep
or Hibernation Mode.
■ Do not change the screen resolution while running the "WinDVD BD for
TOSHIBA".
■ Do not change the display device while running the "WinDVD BD for
TOSHIBA".
Starting WinDVD BD for TOSHIBA
Use the following procedure to start WinDVD BD for TOSHIBA.
■ When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA
starts automatically.
■ Select Start -> All Programs -> Corel -> Corel WinDVD BD to start
WinDVD BD for TOSHIBA.
Operating WinDVD BD for TOSHIBA
Notes on Using WinDVD BD for TOSHIBA.
1. Screen display and available features may vary amongst BD Videos
and scenes.
2. If the menu is opened in the Display Area using the Control window's
Top Menu or Menu buttons, touch pad and mouse menu operations
may not be able to be used.
Open WinDVD BD for TOSHIBA HELP
WinDVD BD for TOSHIBA features and instructions are also explained in
detail in WinDVD BD Help. Use the following procedure to open WinDVD
BD Help.
■ Click the "Corel Guide" button ( ) in the Display Area and select
"Launch Help" button.