Filter
Top Products
User’s Manual 6-9
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Memory Media Card
For further information, please refer to Chapter 3, Operating Basics.
Pointing device
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
Memory media card
error occurs
Remove the memory media card from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
You cannot write to a
memory media card
Remove the memory media card from the computer
and check to ensure that it is not write protected.
You cannot read a file Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
The Touch Pad does
not work.
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enables.
On-screen pointer
does not respond to
pointing device
operation
In this instance the system might be busy - Try
moving the mouse again after waiting a short while.
Double-tapping
(Touch Pad) does not
work
In this instance, you should initially try changing the
double-click speed setting within the Mouse Control
utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and click
OK.