Filter
Top Products
4.7 Top Cover 4 Replacement Procedures
M2x4 white flat screw
CN916
CN12
CN1
CN3
Figure 4-19 Removing the Top Cover
Installing the Top Cover
Install the top cover with the display assembly according to the following procedures and
Figures 4-18, 4-19.
1. Seat the top cover, adjusting its position.
2. Secure the top cover with M2x4 white flat head screw.
3. Connect the touch pad board flat cable from CN12, Finger print cable from CN916
MMB board flat cable from CN3 and power board flat cable from CN1.
4. Turn the computer upside down and secure it with seventeen M2.5x6 black bind
screws and three M2x4 black bind screws.
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-31