Filter
Top Products
4 Replacement Procedures 4.19 Power board, Switch board, Touch Pad board
4-64 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A3000 Maintenance Manual
Installing the Power board, Touch Pad board and Finger print board (MMB board and
Wide Lux touch pad)
Install the Power board, Touch Pad board and Finger print board according to the
following procedures and Figure 4-40.
1. Seat the finger print board to the correct position.
2. Seat the button board, touch pad bracket in the correct position and secure it with the
five M2.5x3.5 white flat head screws.
3. Seat the button board to the correct position and secure it with two M2.5x3.5 white
flat head screws.
4. Connect the button board flat cable to CN9012 on the button board.
5. Connect the touch pad flat cables to JP1 on the touch pad.