Filter
Top Products
4.11 System Board, AC-IN cable, Fan and Robson card 4 Replacement Procedures
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-39
Installing the System Board, AC-IN cable, Fan and Robson card
Install the System Board, AC-IN cable, Fan and Robson card according to the following
procedures and figure 4-23, 4-24.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is pushed in.
1. Turn the system board upside down and securing the Robson card with two M2x2
black flat head screw.
2. Connect the AC-IN cable to CN900
3. Seat the fan in the correct position and connect the fan cable to CN902 on the system
board.
4. Secure the fan with two M2.5x4.5 white flat head screw on the mainboard.
5. Seat the AC-IN cable in the correct position.
6. Seat the system board in the correct position.
7. Secure the fan with one M2.5x4.5 white flat head screw.
8. Secure the system board with one M2.5x4.5 white flat head screw.