Filter
Top Products
4 Replacement Procedures 4.3 ODD Bay Module
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble
or replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4-13.
1. Remove two M2x4 black flat head screws.
2. Remove the bracket.
M2x4 black flathead screw
Bracket
Odd bay module
Figure 4-13 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-13.
1. Seat the bracket and secure it with two M2x4 black flat head screws.
4-22 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual