Filter
Top Products
4.18 Power Button Board and Switch Board 4 Replacement Procedures
4.18 Power Button Board and Switch Board
Removing the Power Button Board and Switch Board
Remove the Power Button Board and Switch Board according to the following procedures
and Figures 4-33.
1. Remove two M2x3 black flat head screws.
2. Remove the Power button board.
3. Remove two M2x3 black flat head screws.
4. Remove the switch board.
5. Disconnect the switch board flat cables from CN1 on the switch board.
M2x3 black flat head screw
CN1
Switch board
Switch board flat cable
Power button board
Figure 4-33 Removing the power button board and switch board
Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual 4-55