Filter
Top Products
143
Utilities
TOSHIBA Hardware Setup
❖ CPU—Allows you to enable or disable CPU frequency
switching modes
Dynamically Switchable—This mode is the default setting for
your computer, and automatically changes the processing
frequency and decreases voltage depending on the power
source:
❖ AC Power—If your computer is connected to the AC
adaptor, the CPU frequency mode is set to high for faster
processing
❖ Battery Power—If your computer is running on battery
power, the CPU frequency mode is set to low for slower
processing. Switching the CPU to low allows you to
conserve power and extend the operating time of your
battery
Always High—Sets the CPU speed to high when using either
the battery or the AC adaptor
Always Low—Sets the CPU speed to low when using either
the battery or the AC adaptor
❖ Display—Allows you to change various default settings for the
built-in display
When the computer restarts, it remembers the last configuration. If
data does not appear on the display you are using after starting in
Sleep mode, press
Fn + F5. For more information, see “Directing the
display output when you turn on the computer” on page 75.
❖ General—Allows you to view the current BIOS version or
change certain settings back to their default values
❖ Keyboard—Allows you to access the wake-on keyboard
function
❖ LAN—Allows you to set networking functions
❖ SATA—Allows you to set conditions for SATA
❖ USB—Allows you to enable or disable USB Legacy Emulation
❖ USB Memory Bios Support Type—Interprets the way the
system sees the USB flash drive.
❖ HDD—Hard Disk Drive
❖ FDD—Floppy Disk Drive
NOTE