Filter
Top Products
226
TOSHIBA PC Health Monitor
Starting the TOSHIBA PC Health Monitor
5.375 x 8.375 ver 2.3
If a TOSHIBA PC Health Monitor message is displayed
A message will be displayed if any changes which may interfere
with the operation of the program are detected. Follow the on-
screen instructions. If the following message is displayed, use the
numbered procedures to remedy the problem:
Please click [OK] to run the TOSHIBA Cooling Performance Diagnostic
Tool to check the cooling performance of your PC.
1 Click OK to start the “TOSHIBA Cooling Performance
Diagnostic Tool.”
2 If the “It is possible that the computer's cooling performance
has decreased. Please clean the cooling module according to
the instructions in your User's Guide” message is displayed
after running the “TOSHIBA Cooling Performance Diagnostic
Tool,” the cooling module requires cleaning. Refer to
“Cleaning the cooling module” on this page.
3 After cleaning the cooling module, run the TOSHIBA Cooling
Performance Diagnostic Tool again.
Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Cooling Performance Diagnostic Tool.
4 If the “Please click [OK] to run the TOSHIBA Cooling
Performance Diagnostic Tool to check the cooling performance
of your PC.” message is still displayed after running the
“TOSHIBA Cooling Performance Diagnostic Tool” in step 3, it
is recommended you turn off the computer and contact
TOSHIBA support.
Cleaning the cooling module
This section explains how to clean the cooling module.
If you use the computer for a long period, the inside of the computer
may become hot. Always allow the computer to cool to room
temperature before you clean the cooling module.
To clean the cooling module, follow the steps detailed below:
1 Shut down the computer - make sure the Power indicator is off
(refer to “Turning off the computer” on page 78 in the Getting
Started chapter, if necessary).
2 Remove the AC adaptor and all cables and peripherals
connected to the computer.
NOTE