Battery pack The rechargeable lithium-ion battery pack
provides power to the computer when the AC
adaptor is not connected.
For more detailed information on the use and
operation of the battery pack please refer to the
Battery section.
Underside
The following figure shows the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.
Figure 3-5 The underside of the computer
2
3
4
1
1. Battery lock 3. Memory module slot
2. Battery release latch 4. Cooling vents
Product appearance depends on the model you purchased.
Battery lock Slide the battery lock to release the battery pack
ready for removal.
Battery release latch Slide and hold this latch into its "Unlock" position
in order to release the battery pack for removal.
For more detailed information on removing the
battery pack please refer to the Battery section.
Memory module slot The memory module slot allows for the
installation, replacement and removal of
additional memory module.
The size of the memory modules varies
depending on the model. The actual amount of
useable system memory will be less than the
installed memory modules.
Refer to the Additional memory module section.
Cooling vents The cooling vents help the processor to avoid
overheating.
series
User's Manual 3-6