Filter
Top Products
4 Replacement Procedures 4.7 Keyboard
4-20 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-8 and 4-9.
1. Place the keyboard face down on the palm rest.
2. Connect the keyboard cable to the connector CN3230 on the system board.
3. Install the keyboard support plate and secure it with the following screw.
• M2.5×8B FLAT HEAD screw ×1
4. Turn the keyboard face up and set it in place.
5. Secure the keyboard with the following screws.
• M2×3S S-THIN HEAD screw ×2
6. Install the keyboard holder and press to secure the latches.