Filter
Top Products
TECHNICAL SUPPORT
Technical support can be obtained by calling 949/455-0407 or by sending an
email to: toshibadpd@teleplan-ventura.com or visiting our website at:
http://www.sdd.toshiba.com
FCC DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC
Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made to the equipment without the approval of
the manufacturer could void the user's authority to operate this equipment.
LASER CAUTION
This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model
properly, read this Owner's Manual carefully and keep this manual for future reference. In case of any trouble with
this model, please contact your nearest "Authorized Repair Center". To prevent direct exposure to the laser beam,
do not try to open the enclosure
SPECIFICATIONS
DATA BUFFER 2Mbytes
POWER SUPPLY +5v, +12v
MTBF 100,000 hours
DIMENSIONS (Wx H x D) 5.7” x 1.6” x 7.6” (146mm x 41.5mm x 193mm)
WEIGHT 0.58lbs ( 0.98kg)
MOUNTING ORIENTATION ±10° vertical / ±20° horizontal
SD-R1102
7
DVD: 2,048
CD: 2,048 (mode 1)
2,336 (mode 2)
DATA CAPACITY
(bytes/block)
ROTATIONAL SPEED
DVD: 5,053rpm (3.3-8X)
DVD-R:1,100-2,800rpm (2X)
CD: 6,849rpm (13.8-32X)
CD-RW:4,281rpm (8.6-20X)
CD-R,CD-RW: 1,700- 3,960rpm (8X)
SUSTAINED DATA
TRANSFER RATE
DVD: 4,476 - 10,816KB/sec
CD: 2,070 - 4,800KB/sec (mode 1)
2,359 - 5,472KB/sec (mode 2)
ACCESS TIME (Typ.)
Avg. Random Access
Avg Random Seek
Avg. Full Stroke
DVD CD
130ms 100ms
120ms 95ms
200ms 160ms