Filter
Top Products
42
Before calling service personnel
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications”
p.41
as well.
If This Happens Check
No power • Is the power cord plugged in? Is it connected to the projector?
• Is the outer lamp cover attached properly?
p.38
Power goes out
during use
• Is the ambient temperature high?
p.41
• Is the air intake or air exhaust blocked?
p.41
No picture • Is the mute function on?
p.30
• Is the brightness setting minimized?
p.33
• Are the connections set up correctly?
p.24
• Are all the connected devices functioning properly?
No audio • Is the mute function on?
p.30
• Are the connections set up correctly?
p.24
• Are all the connected devices functioning properly?
Picture not
displayed
correctly
• Is the input signal supported by the projector?
p.44
,
• Is there something generating an abnormal video signal, for
instance the video tape?
Picture blurred
Part of picture
out of focus
• Is the lens dirty?
• Is the lens focus adjusted optimally?
p.28
•
Is the projection distance within the projector’s supported range?
p.23
• Is the projector’s screen placement angle tilted too far?
p.23
• Are the sharpness or sampling phase adjustments off?
Image is dark • Are the brightness or contrast adjustments off?
p.33
• Is the lamp nearing the end of its service life?
p.36
Colors too light
Bad shading
• Are the color,tint adjustments off?
p.33
• Is the screen dirty?
• Is the lamp nearing the end of its service life?
p.33
Control panel
key doesn’t work
• Is the key lock function on?
p.30
Remote control
doesn’t work
• Is the remote control ON/OFF switch set off?
p.20
• Are the remote control’s batteries drained?
• Are the batteries inserted into the remote control correctly?
p.20
• Is the remote control being used within the effective range?
p.20
•
Are there any obstructions between the remote control and
projector?
• Are there any fluorescent or other bright lights shining at the
projector’s infrared remote sensor?