Toshiba TDP-XP1 Projector User Manual


  Open as PDF
of 48
 
36
The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure
to fully understand the following characteristics of the lamp and handle it with extreme care.
• Thelampmayburstwithaloudnoiseduetoimpactordeterioration,orfailtolightatthe
expiration of its life.
• Howlongittakesbeforethelampburstsorthelifeexpiresmayvarygreatlybylamp.
Some may burst shortly after first use.
• Burstislikelytohappenifthelampisusedafterthereplacementperiodhaselapsed.
• Whenthelampbursts,thebrokenpiecesofglassmaygetinsidetheproductorbe
released outside from the openings for ventilation.
• Whenthelampbursts,aslightamountofmercurygasenclosedinthelampalongwith
glass dust may be released from the openings for ventilation.
■
Immediatelyreplacethelampwhenareplacementmessage
appears on the screen.
• Whenthereplacementtimeapproaches,amessagewillappearonthescreen.
• Theriskofburstwillincreaseifthelampiscontinuouslyusedwithoutbeingreplaced.
• Frequentlychecktheusedhoursandpreparespareswhenthereplacementtime
approaches. (Refer to “Status display”.
p.35
)
■
Whenthelampisbroken
• Ifglasscomponents,includingalampandalens,shouldbreak,handlethebroken
pieces with care to avoid injury and contact your dealer for repair service.
• Intheeventoflampburst,unplugtheproductfromthewalloutlet,leaveandcompletely
ventilate the room. Then, thoroughly clean the area around the projector and discard any
edible items placed in that area, as they may be contaminated.
• Whenthelampbursts,consultadoctorifglassdustormercurygasgetsintoyoureyes
or is inhaled.
Aboutlamp
Maintenance
 previous next