2 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
SCSI DRIVES
T
he XM-6401B is a SCSI-2 (Small Computer Systems Inter-
face) device. Some other SCSI devices you may already have
connected to your computer are scanners, tape drives, or an-
other CD-ROM drive.
PC SYSTEMS: To add a SCSI device to your computer, you must
have a SCSI interface card already in place. The interface card fits into
one of the slots inside your computer and connects to your CD-ROM
device via a SCSI cable.
Your CD-ROM also requires a software driver to be installed. This
driver is written for the SCSI interface card you are using. If you do
not have the CD software driver, contact your SCSI card manufac-
turer (do not contact Toshiba).
APPLE MACINTOSH SYSTEMS: If you are connecting the XM-
6401B CD-ROM to an Apple Macintosh system, there is no need to
install an interface card, as Apple systems have a built-in SCSI port.
You will need a CD-ROM software driver written for the Macintosh
that supports Toshiba CD-ROMs. (Toshiba recommends CD-ROM
Tool Kit by FWB Inc.)*
* CD-ROM Tool Kit can be purchased from Advanced Multimedia
Concepts (AMC), 888-262-9700.