Filter
Top Products
Inputs Diagram
Inputs
1 2 3 4
5 6 7 8
1 AUDIO1 This can be connected to the 1st audio-out connector of any sound resource.
2 AUDIO2 This can be connected to the 2nd audio-out connector of any sound resource.
3 LINE IN This can be connected to the 3rd audio-out connector of any sound resource.
4 DC IN This is for connecting the power cable.
5 VIDEO1 This can be connected to the 1st video-out connector of any video resource.
6 VIDEO2 This can be connected to the 2nd video-out connector of any video resource.
7 S-VIDEO This can be connected to the 3rd video-out connector of any video resource.
8 PC IN This can be connected with the D-Sub 15 pin signal connector.
Page.10
Precautions
z Read all of these instructions and save them for later use.
z Follow all warnings and instructions on the product.
Product
z Do not cover block the vent holes in the case.
z Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They
may cause accidents, fire, electric shock or failure.
z Disconnect the power plug from the AC outlet if you will not use it for an indefinite period.
z Do not attempt to service this product yourself, by opening or removing covers may expose
you to dangerous voltage points or other risks.
z Do not touch the screen directly with your fingers. You may damage the screen, and oil from
your skin in difficult to remove.
z Do not apply pressure to screen. The LCD is a very delicate product.
Power
z Use the type of power indicated on the marked label.
Plugs
z Do not remove any of the prongs of the monitor’s three-pronged power plug.
z Disconnect the power plug from the AC outlet under following conditions
z If you will not use it for an indefinite period time.
z When the power cord or plug is damaged or frayed.
z If the product does not operate properly, adjust only those controls that are mentioned in the
operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal
operation.
z If the product has been dropped or the cabinet has been damaged.
z If the product exhibits a distinct change in performance, indicating a need for service.
z Power and extension cords
z Do not allow anything to rest on the power cord.
Page.11