TP-Link MC111CS Network Card User Manual


 
6
1.5.2 Switch
¾ TP_AUTO: The TP port operates in Auto-Negotiation mode;
¾ TP_DIS: The TP port operates in FORCE mode;
¾ TP_100M: The TP port operates in 100Base-Tx;
¾ TP_10M: The TP port operates in 10Base-T mode;
¾ TP_FDX: The TP port operates in Full-Duplex mode;
¾ TP_HDX: The TP port operates in Half-Duplex mode;
¾ LFP_OFF: The Link Fault Pass Through function disable;
¾ LFP_ON: The Link Fault Pass Through function enable.
Connect different devices, we suggest leaving the switches like these
as shown below, otherwise the Media Converter may not work
normally.