Filter
Top Products
TL-PA4020
AV500 2-port Powerline Adapter
Note:
The adapter will automatically switch to Power-Saving Mode five minutes after the device connected to
it is turned off.
2.3 Physical Interface
There are three physical interfaces on this Powerline Adapter.
Interface
Description
Ethernet
Port
Two 10/100 Mbps Ethernet ports for connecting the adapter to the PC or the
broadband device with a network cable.
Power Plug*
A Power Plug for connecting the adapter to a power socket (100–240V~).
Pair Button
Press and hold for 1 second to set up or join a secure powerline network.
Press and hold for 8 seconds to leave an existing powerline network.
Press and hold for more than 15 seconds to reset the powerline adapter.
* The provided power plug may differ from the picture due to different regional power specifications. Here
we take the EU version of this product as an example.
Note:
1. If you press the Pair button for about 8 seconds, the Powerline Adapter will leave the network which
it is associated with and its network name assumes a random value. The Power LED turns off when
it disconnects from the Powerline network.
2. For detailed information about the Pair button, please refer to
Chapter 5 Advanced Feature: How to
Use the Pair Button.
2.4 Connection Instruction
To ensure the optimum performance of the Powerline Adapter and significantly improve the transmission
capacity of the network, we recommend that you comply with the following connection rule:
Plug the Powerline Adapter directly into a wall socket instead of the multiple sockets.
Power Plug
Pair Button
Ethernet Port
4