Filter
Top Products
TL-PA411 AV500 Mini Powerline Adapter
5
On
The adapter is connected to a powerline network.
Blinking
The adapter is transferring data.
Powerline LED
Off
The adapter isn’t connected to any powerline network or
is in power-saving mode.
On
The Ethernet port is connected, but there is no data
being transferred.
Blinking The Ethernet port is transferring data.
Ethernet LED
Off The Ethernet port isn’t connected.
)
Note:
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically
switch to the power-saving Mode.
2.3 Physical Interface
There are three physical interfaces on this Powerline Adapter.
Interface Description
Ethernet
A 10/100Mbps Ethernet port for connecting the adapter to the PC or the
broadband device with a network cable.
Power Plug*
A Power Plug for connecting the adapter to a 100V ~ 240V AC power
socket.
Pair Button
Pair buttons are used to secure a powerline network. To secure your
network, please follow the steps below. Firstly, plug in a new adapter, and
press its pair button for 1 second; then plug in another adapter and press its
pair button for 1 second as well. The two buttons should be pressed within 2
minutes of each other. After that, wait about 60 seconds so that the two
adapters can finish connecting.
* The provided power plug may differ from the picture due to different regional power specifications.
Here we take the EU version of this product as an example.